Roof-Mount

A rooftop tent that auto-deploys and doubles as a cargo carrier. The ultimate hybrid system that combines a rooftop tent and cargo carrier all in one. Thule Basin pops up in under a minute and the hard-shell exterior makes this rooftop tent suited for harsh weather conditions. When closed, it not only doubles as a roof box, but also has a clean and sleek look. Easy-to-install mounting brackets let you lock the tent to your roof rack or platform for peace of mind. Thule Basin is compatible with all Thule Evo roof racks – make sure to check weight limitations for all feet and fit kits, as well as other roof racks. - Quick setup – under a minute - Pops straight up for maximum interior space - Converts to a cargo carrier

Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 6 pairs of skis or 4 snowboards Technical specifications - Dimensions: 34.2 x 2.8 x 3.9 inch - Loading width: 29.5 inch

Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.

Easy-to-use foot providing 8" roof clearance on vehicles with rain gutters. - Robust and easy-to-use roof rack for cars with rain gutters - Secures to roof with Thule One Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Quick and easy way to carry all types of watersports gear safely and securely. - Boards and boats are well protected during transport with these high density foam pads - Integrated no-slip grip on top of pads keeps loads in place - Long lasting performance with durable 600D nylon construction with UV resistance - Easy on and off with hook and loop closure design along bottom of pads - Ideal for carrying surfboards, SUPs, sailboards - To be used with Thule Locking Straps or Thule Load Straps Size - Medium = 20-inch - Long = 30-inch

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 135cm / 53 in

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. Features - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Loading width: 50-inch - Length: 50-inch - Maximum load: 220-pound. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

A versatile, horizontal kayak carrier with large cushioned, flexible pads that conform to a large range of hull shapes as well as SUPs. - Protects the hull with large, flexible, cushioned pads - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks and SUPs up to 36 in/90 cm wide and 85 lbs/40 kg - Easily secure the kayak or SUP using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Can carry a variety of hull shapes as well as SUPs with two independent pivoting saddles with angle-setting lever

Thule’s UpRide is a universal upright bike rack with no frame contact, providing fast and secure mounting and maximum frame protection. - Ratcheting wheel strap quickly secures back wheel to tray - Maximum bike weight up to 20 kg. - No bike frame contact is made as the hook securely grabs the front wheel Suitable for bikes with carbon frames - Versatile design accommodates bikes with non-traditional frame designs, rear suspension, and bottle cages - Simple interface for switching carrier from one side of your car to the other - Fits most 20–29” wheel bicycles with tires up to 3" wide (up to 5” with Thule UpRide Fatbike Adapter, sold separately) - Locks the bike to the bike rack and the bike rack to the vehicle (locks sold separately)

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 135cm / 53 in

Thule's aluminum constructed TracRac Van rack lets you add to your van's already impressive cargo capabilities, carrying up to 750lbs of load on the roof. - Protect different size loads with the aluminum load stops that adjust to the full width of the van - Aerodynamic and quiet due to the integrated wind deflectors - Easily installs to the rain gutters for quick installation - Accommodates curved roof vans with shims that help level the load bars - Durable, corrosion resistant Aluminum construction

Aerodynamic slide-out rack for convenient loading and unloading of skis and snowboards. Features - Extendable for easy loading and unloading without having to stretch over the car roof - Rooftop rack designed to carry all types of skis and snowboards - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Easy to open and close while wearing gloves thanks to oversized push buttons - Added roof clearance for skis with tall bindings thanks to raised design - Lock the skis to the rack, and the rack to the car, with the Thule One-Key system (locks included) - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options Tech Specs - Load capacity skis: Up to 6 pair - Load capacity snowboards: Up to 4 boards - Loading width: 29.5-inch - Dimensions: 34.2 x 2.8 x 5.5 inch

The Thule Canyon roof basket gives you additional storage space while still allowing gear to be easily accessible. With its robust, tubular-steel design, it is ideal for hauling gear of all shapes and sizes. - Wedge-shaped, low-profile design combines style and function with tapered side walls making it easier to load and unload - Wind fairing is included to help air flow over your cargo - Fits a broad range of vehicles with versatile mounting hardware, and includes t-track mounting for Thule AeroBlade and Thule Xsporter bars - Basket Extension (sold separately) extends the cargo area by 20" - Mounts to all Thule rack systems, round bars and most factory racks - Secures to roof with Thule One Key locks (sold separately) - Height (in): 6 in - Length (in): 50.25 in - Width (in): 41 in - Weight (lb): 29 lb - Load capacity: 150 lb - Maximum barspread: 37 in - Minimum barspread: 20 in

Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.

Designed to withstand the elements of any season making this tent perfect for any year-round adventure. - Can accommodate up to two people - Constructed from coated 600 denier and a 260g poly-cotton blend made to withstand the elements of any season - Tent fabric is both UV and mold-resistant to withstand the elements of any season - Mesh panels offer plenty of ventilation and open for more airflow - Four, large internal pockets for storing gear and camping accessories - Includes a high-density foam mattress for added comfort Technical specifications: - Sleeping capacity: 2 person - Dimensions (Open): 84 x 48 x 39 in - Dimensions (Closed): 42 x 48 x 11 in - Sleeping footprint: 84 x 48 in - Peak internal height: 38 in - Weight: 105 lb - Static weight capacity: 400 lb - Minimum bar spread: 25.2 in - Base construction: Welded aluminum tube with insulation and aluminum cap sheet - Canopy fabric: 260g Polyester Cotton; 600D ripstop fabric with water-resistant ventilate coating; UV and mold resistant - Seasons: All - Mosquito screens: Yes - Internal frame: 5/8" (16mm) wrapped aluminum

The Thule SUP Taxi combines security and convenience, making it the most popular Stand Up Paddle board carrier on the market. - Newly designed push button lock system allows for quick and easy locking strap operation and security - Unsurpassed security for your boards due to the heavy-duty, steel reinforced webbing and easy-to-use locking cam - Exclusive, telescoping design delivers a custom fit for board widths up to 34" wide - Equipped with Speed-Link mounting system for convenient, tool-free mounting - Dual loading design allows for transport of two boards with maximum stability - Soft, weather resistant padding protects boards during transit - 2 One Key lock cylinders (included) to secure stand-up paddle boards in the carrier - Fits all Thule Rack Systems, round bars and most factory racks

This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

A flexible, kayak carrier with felt-lined saddles that make it easier to load and unload. Features - Easily load and unload the kayak with the pivoting felt-lined rear saddles that help glide and center a kayak onto the vehicle - Two independent pivoting saddles with angle-setting lever conforms to limitless range of hull shapes - Protects the hull with large, flexible, cushioned pads - Quickly secure the kayak using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks up to 36 in/90 cm wide and 75 lbs/35 kg Technical specifications - Load capacity: 75 lb - Dimensions: 5 x 8 x 5.5 in - Weight: 6.8 lb - Length of straps: 2x15' - Fits AeroBlade, SquareBar, and Xsporter Pro

Upright bike carrier for the quickest, most convenient mounting – for bikes up to 44 lbs. - 2 One Key lock cylinders (sold separately) lock the bike to carrier and carrier to rack. - Mounts to all Thule rack systems, round bars and most factory racks - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps - Easy, tool-free interface for switching carrier from one side of your car to the other.

Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

Lightweight and low-profile design that is easy to install and easy to transport. - Can accommodate up to two people - Ultra low-profile design folds down to 10" / 25cm for better aerodynamics and vehicle fit - Tent base is constructed of thermoplastic materials that are both durable and 100% recyclable - Dome canopy is lightweight while still providing all-season protection - Patented ZipperGimp easily attaches the canopy to the base of the tent Technical specifications: - Sleeping capacity: 2 person - Dimensions (Open): 84 x 50 x 44 in - Dimensions (Closed): 43 x 50 x 10 in - Sleeping footprint: 84 x 50 in - Peak internal height: 38 in - Weight: 105 lb - Static weight capacity: 400 lb - Minimum bar spread: 24 in - Base construction: Tepui Tec (cellulized thermoplastic honeycomb fiberglass) - Canopy fabric: 3000WP breathable ripstop polyester, UV, and mildew resistant; flame retardant - Seasons: All - Mosquito screens: Yes - Internal frame: 5/8" (16mm) wrapped aluminum

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

Set of four TR fit hooks Compatibility: IN-TR and IN-XR Stays Recommended Use: Attachment of IN-TR or IN-XR Stays to your vehicle Each TR Fit Hook Set is designed for use on specific vehicle makes / models. Please refer INNO's Fit Guide for the proper kit number for your specific vehicle Warranty: Lifetime

Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

Sleek and versatile fork-mounted bike rack that offers convenient transport for Quick-release bikes. - Easily mount standard Quick-release bikes (9mm). Fits Thru-axle bikes (9-15mm) and 20x110mm Thru-axle bikes with additional adapters (sold separately) - Accommodates bikes with disc brakes - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to the audible confirmation of correct mounting - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other - Adjustable protective wheel strap holds the rear wheel securely in place - Mounts to all Thule rack systems, round bars, and most factory racks

- Adds 22" of additional storage when added to the SportRack Roof Basket (sold separately) - Fits SportRack Roof Basket (SR9035) - 22"(l) x 39"(w) x 6.25"(h)

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

SportRack Complete Roof Rack System Consult Sportrack's Fit Guide for complete fit information for your vehicle.

The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty

Single replacement 66" Cross Bar.

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). - This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Limited Lifetime Warranty. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 73.00 lbs - Dimensions: L 76.00in x W 65.00in x H 4.00in - Some assembly required, 60 minute install

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). - This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 76.53 lbs - Dimensions: L 84.00in x W 54.00in x H 4.00in - Some assembly required, 60 minute install

A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

Ready to go when the fish are biting, the TopWater is a purpose-built, enclosed fishing rod box—keeping you prepared to hit the water with up to 8 fishing rods, up to 8 feet long, fully rigged, organized, and out of the vehicle. From spin to bait casting to fly rods, the protective foam pads and retention straps keep rods and reels safely suspended in place without getting banged around or entangled. The space below your rods makes room for low-profile tackle boxes or other wet gear. Made in the USA, this strong and rugged fishing rod box locks your gear with an included Yakima SKS (Single Key System) lock. For added ease, the universal attachment secures the TopWater to nearly any roof rack or Yakima's EasyRider and RACKandROLL trailers. Product Details: - Carry up to 8 fully rigged-up fishing rods of any style, up to 8 ft. long. - Side opening for easy access to rigged-up fishing rods. - Keeps wet rods out of the vehicle, organized, and set up for the day. - Space below the rods is perfect for low-profile tackle boxes and other gear. - Protective foam pads-designed with individual rod slots. - Rubber retention straps secure rods in place. - Small drain holes help prevent water from pooling in bottom of the box. - Built-in rod shields protect rod tips from damage. - Removable rod holders for 4 season transport of skis and other long gear. - Made in the USA with a sleek, aerodynamic Carbonite-textured lid. - Universal mounting hardware fits all Yakima crossbars and most other roof racks. - Add the SmarT-Slot Kit 5 to attach to a T-slot crossbar for an even sleeker profile (sold separately). - The included Yakima SKS (Single Key System) lock secures rods inside TopWater and locks TopWater to roof rack. - Made in the USA. Product Specs: - Weight: 31.10 lbs - Dimensions: L 102.00in x W 18.00in x H 9.00in

Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks. - New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs - Sleek, low-profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 18.00 lbs. - Dimensions: L 56.00 in x W 9.50 in x H 4.50 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty

Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch

Set of four TR fit hooks Compatibility: IN-TR and IN-XR Stays Recommended Use: Attachment of IN-TR or IN-XR Stays to your vehicle Each TR Fit Hook Set is designed for use on specific vehicle makes / models. Please refer INNO's Fit Guide for the proper kit number for your specific vehicle Warranty: Lifetime

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

- Fits into the SportRack hitch basket to keep contents protected during transport - Durable construction for long lasting use - Made from water resistant nylon to help keep contents dry - 10 cubic feet of cargo 60"(l) x 19"(w) x 16"(h) - Fits SportRack Hitch Basket (sold separately)

Square bar Base Stays. For vehicles with smooth roofs without rain gutters/naked roof includes locks and keys

Hooks and pads (Fit Kits) are used to mount Stays to vehicles with smooth roof or track systems. This may not be required depending on the model of car. Hooks and pads are vehicle specific please consult the INNO Fit Guide for the proper fit.

- Allows SportRack Roof Rack Systems to be used on vehicles with short or dramatically curved rooflines - No drilling required - Hold up to 130 lbs or 59 kg

Introducing the new Switch ski and snowboard rack from Kuat. This rack gets in positions your yoga teacher would envy. Switch it up for loading and transporting gear to the mountain and switch it down when you're commuting around town. Fashionable and functional all for a price you can get down with, too. - Folds to a low-profile, aerodynamic orientation - Universal security mounts fit round, square or aero bars - Integrated locks included - Available in 4 or 6 ski versions

RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

Cross bars mount to a stay and allow Attachments to be mounted. Cross bars comes in several lengths, please consult the INNO Fit Guide for your vehicles specific length. 42,46,50,54, Etc

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

Inno aerodynamic crossbars are much quieter than their square bar brothers. Inno calls the color - sand brushed black. It is a matte black finish. These are sturdy, aluminum bars, sold individually. Two bars are required for each rack system.

Premium aerodynamic load bar for an exceptionally quiet ride and easy installation of accessories. 1-pack. - Aerodynamic and quiet - Sliding functionality for easy loading - Easy to install and use Features: - Load bar for Thule Edge roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - Designed and developed for swift click-in assembly with Thule Edge load carrier feet, providing an integrated, low-profile roof rack and a custom look - Smooth installation and removal of accessories thanks to upper T-track with QuickAccess interface - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length Specifications: - Loading width: 36-40 in - Length (in): 41 - Maximum load: lb/75 kg. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Premium fork mount roof bike rack for the bike enthusiast with fast and easy mounting for both Thru-axle and standard Quick-release bikes. - Easily mount Thru-axle bikes (9-15mm) and standard Quick-release bikes (9mm). Fits 20x110mm Thru-axle bikes with an additional adapter (sold separately) - Accommodates bikes with disc brakes - Fasten your bike to the fork adapter on the ground for easy mounting - The bike slides into the carrier on a guided track on the fork adapter and clicks into place - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to audible and visual confirmation of correct mounting - Unmount bikes from the rack easily with a release lever - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other

Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)

The OffGrid Extension adds 40% more capacity to your OffGrid cargo basket. Installation is easy - just plug it in, tighten it down, load it up, and hit the road. At 18" long, it frees you to bring another cooler, a box of firewood, or a couple more duffels. Fits Medium OffGrid only. Product Details - Extension for the Medium OffGrid cargo basket - Adds 18” in length - Made from durable, steel for years of rugged use - Simple installation with plug-in design - Compatible with Medium OffGrid basket only Product Specs - Weight: 12.50 lbs - Dimensions: L 18.00" x W 40.00"x H 7.00"