Parts & Accessories

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Body for HitchLock. Requires SKS lock core. (Sold Separately) - Weight: 1.00 lb

For those riding with old-school RoundBars, this simple kit holds our Fishing Kayak Saddles tight so they don't rotate out of position. - Prevents our BigCatch saddles from rotating on our RoundBars - For use with Yakima RoundBar ONLY - Weight: 0.75 lbs

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Thru-axle adapter for the Kuat TRIO rack.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"

Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty

An around-the-bar adapter for fitting winter and water sport carriers on square bars. - Compatibility: Thule SnowPack, Thule SnowPack Extender, Thule DockGlide, Thule DockGrip, Thule Hull-a-Port Aero

An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles. - Enables transportation of bikes with 20x110 mm thru-axle forks

The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps

Piston Fender Strap Kit

Thule replacement lock cylinder. Sold individually (by the each) SPECIFY THE CYLINDER NUMBER YOU NEED IN THE DROP-DOWN LIST (i.e.Cylinder # N117) The number is stamped on the face of the lock or on your key. If you do not have a Thule lock change key (D1251) you will need one to remove an existing lock cylinder or to install a new cylinder.

A pair of adapters for easily attaching the locknload platform directly to yakima timberline or skyline tower.

Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp. - Includes 2 FatStraps to carry one fat bike - Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"

Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty

Mounting hardware for LoadWarrior and MegaWarrior baskets. Includes 1 mounting bracket assembly.

The newest revision of the HitchSafe (launched August 1, 2011) requires a different drawer style and the prior drawer is not compatible with this system. To know if you have the new style of HitchSafe: See photo to the right: 1. The drawer itself is different with each corner having an angle notch out of it 2. The "A" new version of the HitchSafe has two rivets on each side to secure flange to extruded vault. 3. Inside the Vault portion of the HitchSafe above the spring on the back wall (A3) will have the following version code with 2011 or newer being the new version HS7041 AL-215-311 2011 4. A1- The bolt release flat bars will be flush with opening 5. A2- There will be no screws on each corner and they will be flush with the opening as well.

The Non-Skid Roof Pad is designed to keep your car top carrier from shifting on the roof of your vehicle. It also protects your vehicle’s roof from damage caused by sharp-edged objects inside the carrier. Measuring in at 36” L x 36” W, the pad is sized for use with all Rightline Gear Car Top Carriers and Car Top Duffle Bags. Instructions are provided to cut the pad to size for use with the smaller carriers. The Non-Skid Roof Pad is especially recommended when using car top carriers on vehicles WITHOUT a roof rack.

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars. PRODUCT DETAILS - Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts - Quick and easy installation - Includes slide in T-bolts and low-profile spacers - Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars TECHNICAL SPECS - Weight: 0.30 lbs - Dimensions: L 0.75in x W 0.75in x H 2.00in

Our versatile new Eye Bolts integrate seamlessly with our Truck Collection HD Bars, and most T-slot crossbars, to create instant tie-down points for securing gear. Made Yakima-smart, they’re secure, strong and easy to install—just drop them into the slot and twist into place. Product Details: - Rugged steel construction with durable black corrosion resistant finish for many years of use - Includes hardware for both HD Bar and standard T-slot crossbars - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 1.75in x W 0.75in x H 2.12in

Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in

A camping necessity, the SkyLoft holds the small, important stuff you always need, keeping them off the floor and right in reach. Clip it inside your SkyRise tent for easy access to headlamps, smartphones, and late night snacks. When you wake up, take it outside with you and slide it into the SideTrack on your SkyRise to stow jackets, towels, and toys. The mesh material allows you to see your stuff, and the generous 40" x 17" dimensions provide plenty of room. Two zippered pockets give you even more storage options, you can even use one of them to store the SkyLoft when it's time to break camp. Product Details: - Hanging storage net for the SkyRise tent helps keep your camping gear organized - Clips inside your SkyRise’s roof with adjustable straps so your late night essentials are easy to find and out of the way - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to stow daytime necessities, like cooking supplies and treats for Fido - See-through mesh material makes it easy to find what you’re looking for - Two zippered pockets add security and organization and, one doubles as a storage pouch for your SkyLoft when not in use - Measures a generous 40” x 17” to handle enough gear for two or three Product Specs: - Weight: 0.65 lbs - Dimensions: L 40.00" x W 17.00" x H 0.50"

Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in

Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2. - Includes 2 FatStraps to carry two fat bikes? - Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"

Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.