Yakima Products

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase

Single 58" Cross Bar.

Single replacement 66" Cross Bar.

Single 78" Cross Bar.

Use these clamps to attach the LockNLoad platform to an existing Yakima roof rack, factory rack, or other aftermarket roof-rack system. One pair of clamps is required for each crossbar. Check your vehicle fit to verify requirements. Product Details: - Sold as a set of 2 clamps, with included hardware to attach to a single crossbar. - The LockNLoad platform requires 2 or 3 sets of Crossbar Clamps (check your vehicle's and platform's fit requirements for the number of crossbar clamps needed). - Welded steel construction for strength. - Rubber pads protect crossbar finish. - Compatible with all Yakima crossbars, along with many other aftermarket crossbars, factory crossbars, and 2" round or square tubing. - Each set of crossbar clamps adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of crossbar clamps. Never exceed the Yakima- or manufacturer-specified weight limit for your vehicle. Product Specs: - Weight: 1.86 lbs - Dimensions: L 2.75in x W 1.80in x H 1.00in - Some assembly required, 15 minute install

a pair of heavy duty clamps to attach the locknload platform directly to the roof rack crossbars

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

Bring the luxury of a shower to the outdoors by upgrading your RoadShower with this flexible shower head attachment. Connect it to the included outlet elbow, or to a second on/off elbow (sold separately). Product Details - Available in 19" & 30" lengths. - Attaches to the on/off elbow on the RoadShower with quick connect hardware for easy install and removal. - Flexible neck and variable shower head for the perfect shower. - The shower nozzle is low flow with high pressure to efficiently use stored water. - Limited One Year Warranty

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key

Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).

Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty

This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty

Yakima's Side Loader Brackets are permanently side-mounted brackets that fit in the space between the top of your truck shell and the side window. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist. Sold in pairs (towers sold separately).

Have an older Yakima mount but have aero or factory crossbars? No problem. This is the simple and economical way to adapt classic Yakima mounts to just about any size and shape crossbar. The Dynaflex padding to provide all the extra protection and grip you need. Come in sets of four. - Simple, economical way to attach classic RoundBar only Yakima mounts to your factory or aerodynamic roof rack system - Dynaflex padding provide protection and grip - Not compatible with classic Yakima fork-mounted bike carriers; - Sold in sets of 4 Product Specs: - Weight: 3.25 lbs. - Limited Lifetime Warrantyhttps://cdn.shopify.com/s/files/1/0266/3943/3776/products/1_5024962c-0820-4ae8-8909-d5ad194b535e_1024x1024.jpg

There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.

Bring the luxury of a shower to the outdoors by upgrading your RoadShower with this flexible shower head attachment. Connect it to the included outlet elbow, or to a second on/off elbow (sold separately). Product Details - Available in 19" & 30" lengths. - Attaches to the on/off elbow on the RoadShower with quick connect hardware for easy install and removal. - Flexible neck and variable shower head for the perfect shower. - The shower nozzle is low flow with high pressure to efficiently use stored water. - Limited One Year Warranty

12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Don't get stuck in the mud without the right tools. This bracket hooks to your LoadWarrior or MegaWarrior basket so you can secure an axe or shovel while maximizing space and keeping the interior of your vehicle clean. Can you dig it? - Secures a single axe or shovel on your LoadWarrior or MegaWarrior basket Product Specs: - Weight: 1.82 lbs. - Dimensions: L 4.20 in x W 2.00 in x H 1.69 in - Limited Lifetime Warranty

- Heavy-duty steel brackets that accommodate lights of virtually any size or shape. - Sold in set of 2

Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.

Custom-fit for your SkinnyWarrior, the SkinnyWarrior Stretch Net’s an easy way to keep gear secure on rough roads. True to its name, the Stretch Net wraps around the SkinnyWarrior’s load to prevent loose gear from flying out—even on rough terrain. Made to fit the basket with or without the extension, it’s easy to position and hook into place for a secure hold. - Designed for the SkinnyWarrior with or without the extension - Keeps loose gear safe and secure, even on bumpy back roads - Weight: 1.09 lbs - Dimensions: L 55.00in x W 21.50in x H 0.25in - No assembly required

Add the SmarT-Slot Kit 6 to the SkyBox NX, GrandTour, and CBX Cargo Boxes for an even sleeker profile on T-Slot Crossbars. This easy-to-use hardware kit replaces the standard mounting hardware, and directly attaches to a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. PRODUCT DETAILS - T-Slot mounts for SkyBox NX, GrandTour and CBX Cargo Boxes - ?Uses your box's existing removable Torque Knob for a simple worry free install - Clean, low-profile crossbar connection - Maintains an unobstructed flattened floor to provide more space for your gear - Compatible with all Yakima® T-slot crossbars and most other T-slot crossbars.

Long gone are the days when your vehicle's spare tire gets in the way of an epic bike trip. This handy little extension adds 7.25 inches to a 2-inch hitch receiver, giving you the clearance to attach just about any 2-inch bike rack. We're looking at you Broncos, Wranglers, and G-wagons. - Extends your 2" hitch receiver by 7 1/4" - Secures to any 2" hitch receiver using a threaded pin - Heavy-duty steel construction - Provides clearance to most spare tires; please measure your spare tire before hand - Compatible with the following Yakima Hitch Racks: Dr. Tray, OnRamp, HoldUp EVO, HoldUp, TwoTimer, HangOver 4, FullSwing, LongHaul, RoadTrip, EXO System Product Specs: - Weight: 8.63 lbs. - Dimensions: L 12.75 in x W 3.00 in x H 3.00 in - Limited Lifetime Warranty

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks. PRODUCT DETAILS - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal “C” anchor plates 1-3/16” x 13/16” (Contact Yakima Customer Service for additional size anchor plates) PRODUCT SPECS - Weight: 0.60 lbs.

Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.

Use Yakima's MegaWarrior Stretch Net to secure and control loads on the MegaWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in

*Unique two part brackets, configurable out-of-the-box in sixteen different orientations *Rugged steel construction *Supplied with Torx screws for enhanced security Suitable for light bars (up to 10 kg), spot lights, and other accessories *Compatible with LockNLoad and Whispbar HD crossbars

LightenUp your path-and easily secure your light bar or a pair of spotlights on your LockNLoad platform rack and Yakima T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Configurable in 16 different arm-mounting orientations. - Supports up to an 18-lb. light bar or a pair of 9-lb. spotlights. - Max light bar length 52" long, max light bar depth 5.25" (including heat sink). - Heavy-duty steel construction, with a durable black-zinc coating. - Fits LockNLoad platform rack and perimeter rails, Yakima JetStream, FlushBar, RailBar, HD Bar T-slots, and most other T-slot equipped platforms and crossbars. - Also accommodates light bars that don't secure from the ends. - Holds lights with 6/8/10 mm hardware, using included torx head hardware for enhanced security. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 1.00 lbs - Dimensions: L 7.25in x W 2.00in x H 2.00in - Some assembly required, 30 minute install

Get your axes and shovels out of the backseat and up on top where they belong. Easy to use and super secure, the TopGrip OG is a smarter way to carry your long-handled gear. Attach it to either size OffGrid cargo basket, then secure your gear in the padded clamps. Voila! Your axe or shovel is out of the inside of your car, riding safely, securely, and away from the dangers of slamming doors and clumsy passengers. Paddle much? Use the TopGrip OG for paddles as well. Product Details: - OffGrid cargo basket accessory carries one axe, shovel or paddle up and out of the way - Double-padded clamps deliver a super-tight hold without damaging your gear - Fits just about any axe, shovel, paddle or other straight handled item from 30mm to 50mm in diameter - Carries items up to 9 lbs - Easily attaches to Medium & Large OffGrid cargo baskets - Add SKS (Same Key System) locks for added security (sold separately) - Sold as a pair to carry one axe, shovel, paddle or other long item Product Specs: - Weight: 0.93 lbs - Dimensions: L 4.25" x W 2.00" x H 3.25"

Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install

Prevent loads from shifting side to side on your RoundBar roof rack without having to stuff a whole bunch of folded-up blankets onto your roof.

*Position anywhere on your Platform to hold your toolbox, esky or other item in place (in conjunction with tie-downs, sold separately). *Provides greater strength and peace of mind when carrying big, bulky loads, on-road and off-road. *Kit includes four eye bolts

The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it's in the vertical position and easily adjusts to match the height of your cab's roof rack. The 165-pound capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie-downs ensure the load is secure. - Extends your LongArm truck bed extender up to cab height to carry longer loads up to 165 lb - Fully adjustable in height to match your cab's roof rack perfectly - Maintains truck bed space for other gear while still enabling longer loads to be carried such as a fishing kayak, canoe, ladders, lumber and more - Aluminum construction engineered for strength - Durable black powder-coat finish - Included anchor straps secure the LongArm, preventing side to side movement Product Specs: - Weight: 3.00 lbs. - Dimensions: L 2.50 in x W 2.00 in x H 28.25 in - Limited Lifetime Warranty

No awkward loading here. Loading heavy bikes on the StageTwo family of racks is no problem with the RampUp, just lock the ramp in place and roll your bike up onto the tray. - Ramp interlocks to the end of the StageTwo family trays - Provides Loading assistance for heavy bikes - Durable Aluminum construction - Please remove during transportation PRODUCT SPECS - Weight: 3.92 lbs.

A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

*Secure one spare tyre to your LockNLoad Platform *Features a stainless steel ratchet, durable straps & buckles and heavy duty hooks *Easy to secure onto your Platform with the supplied M10 eye bolts and channel nuts

Getting a flat's no problem when you secure a spare tire to the LockNLoad platform rack with this heavy-duty retention kit. The T-slot, drop-in style eyebolt hardware allows quick adjustment and removal. Sturdy stainless-steel ratchet straps take up the slack to hold most common size off-road tires in place for any adventure. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 wheel with tire, up to 100 lbs. - Holds max tire size of 42 x 17R - Easily installs in minutes anywhere on your LockNLoad platform rack. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 3.20 lbs - Dimensions: L 7.00in x W 5.00in x H 2.00in

Put down the drill, you don't need it. This fork mount attaches to the inside lip of your truck bed easily and comes with a locking skewer so you can leave your bike in your bed with confidence that it will be there when you come back. - Truck-bed bike fork mount that allows you to attach your bike to the inside lip of your truck bed rail without any drilling - Fits bikes with 9mm x 100mm front hubs - Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included. - Corrosion-resistant anodized aluminum construction - Soft padding to protect your vehicle's paint job Product Specs: - Weight: 2.20 lbs. - Dimensions: L 3.00 in x W 1.50 in x H 4.00 in - Limited Lifetime Warranty

Replacement cover for the SkyRise medium tent mattress. Cover is made of 210D ripstop nylon and has a PU coating to protect the mattress from condensation and spills. Includes one medium mattress cover.

Get your blades out of the backseat and up on top where they belong. Easy to use and super secure, the TopGrip is a smarter way to carry your paddle and other gear. Attach it to any Yakima crossbar or our ShowDown mount and secure your paddle in the padded clamps. Voila! Your wet paddle is out of the inside of your car, riding safely, securely, and away from the dangers of slamming doors and clumsy passengers. Not a paddler? Use the TopGrip for axes, shovels, or other long items. Product Details: - A convenient and secure way to transport a paddle, axe or shovel on the roof rack - The double padded cradles close over any shaft 30-50mm in diameter - Fully lockable with the addition of 2 SKS locks (sold separately) - Includes hardware for t-slot attachment (for JetStream, FlushBar, RailBar), and MightyMounts for CoreBar and RoundBar - Also attaches to ShowDown to load and carry your paddle next to your boat - Sold as a pair of cradles to carry one paddle, axe or shovel, up to 9 lbs. - Simple, secure roof rack mount carries one paddle, axe or shovel up and out of the way - Double-padded clamps deliver a super tight hold without damaging your paddle shaft - Fits just about any paddle or other straight handled item from 30mm to 50mm in diameter - Carries items up to 9 lbs in weight - Easily attaches to Yakima JetStream, CoreBar, and RoundBar as well as most other t-slot crossbars - Mounts directly to ShowDown kayak/board mount - Add SKS (Same Key System) locks for added security (sold separately) - Sold as a pair to carry one paddle, axe, shovel or other long item - No assembly required - 5 minute install Product Specs: - Weight: 1.18 lbs - Dimensions: L 4.25" x W 2.00" x H 3.25"

SkyRise Rainfly

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

Specifically tailored to fit the SkyRise mattress, these soft sheets let you bring the comforts of home on your next rooftop camping adventure. The cozy 300 thread count sheets come as a set - fitted, flat, 2 pillowcases - and are made of 100% GOTS certified organic cotton. The fitted sheet won't budge during the night and the top sheet's pocketed end makes for easy bed making in the morning. Plus, you can leave them on your SkyRise mattress when you take down camp and hit the road. Product Details: - Sheet set specifically tailored to fit the Small SkyRise rooftop tent mattress - Full sheet set, including fitted sheet, flat sheet, and 2 standard pillowcases - 300 thread-count sheets are made of soft, comfortable 100% GOTS certified organic cotton - No tuck design on the flat sheet makes for easy bed making in the morning - Includes drawstring bag for easy storage away from camp Product Specs: - Weight: 3.30 lbs - Dimensions: L 84.00" x W 48.00" x H 3.00"

Yakima's Heavy Duty Shocks increase the carrying capacity of Yakima's RackandRoll 78 trailer from 250 pounds to 350 pounds (RackandRoll sold separately).

Be prepared with this heavy-duty bracket that keeps a high-lift jack accessible, and which conveniently mounts near the LockNLoad platform's perimeter. Easily installs in minutes and suitable for all common jacks. Add your own padlock to the integrated lock loop for greater security. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details - Securely carries 1 high-lift jack with a 50 mm steel standard bar up to 35 lbs. - Heavy-duty stamped steel construction, with a durable black-zinc coating. - Fits the LockNLoad platform rack and most other brands of T-slot equipped platforms. - Installs in minutes with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Add your own padlock to the integrated lock loop for greater security. - Limited Lifetime Warranty. Product Specs - Weight: 6.50 lbs - Dimensions: L 7.00in x W 3.00in x H 8.00in

*Heavy-Duty welded steel construction *Corrosion resistant finish *Suitable for all common high lift jacks *A padlock can be used to lock the jack to the holder for extra security (padlock not supplied)

- Keep your greasy, dirty Hi-Lift Jack up and out of the way

Our dependable new Recovery Track Mount is a smart, quick, secure way to keep recovery tracks on hand and within reach. Now you can deploy them whenever you need traction. Easy to install and use, this mount is designed to work with our Truck Collection’s HD Bars and SideBar, along with most other T-slot crossbars. - Holds up to four MAXTRAX MKII, TRED Pro or TRED 800/1100 recovery tracks - Durable molded base is built for rugged travel in a range of conditions - Tracks stay secure with Yakima Heavy-Duty Straps for a confident hold on rugged terrain - Attaches to the SideBar accessory on the OverHaul HD or OutPost HD and to the HD Bar or other T-slot style crossbars - Includes hardware for both HD Bar and standard T-slot crossbars - Requires 20–35" (49–89 cm) crossbar spread range (unless paired with SideBar) - 35-lb. load capacity - Weight: 3.20 lbs - Dimensions: L 10.00in x W 3.00in x H 11.50in - Some assembly required, 5 minute install

Yakima's Spare Tire Carrier lets you conveniently store your vehicle's spare tire inside your Yakima LoadWarrior or MegaWarrior cargo basket (each sold separately). It holds up to a 35-inch tire, locks with a padlock (sold separately) and leaves plenty of room in the basket for additional gear storage.

An easy way to make load up less of a chore, the BoatLoader EVO telescopes out 28" from your roof rack to help get canoes, kayaks, and boards up to the roof. When not in use, it stows neatly inside your RoundBar or CoreBar crossbar, ready and waiting for the next trip to the water. It's easier on your back, your boat and your car's paint job. Product Details - Telescoping boat load-assist arm helps you easily get big boats and boards up to your roof - Protects kayaks, canoes, and your car from dings, scratches and dents - Extends 28" from end of bar for superior clearance and ease of use - Retracts into the bar for instant storage - Corrosion-resistant material provides years of rugged use - Fits Yakima CoreBar and RoundBar crossbars only Product Specs - Weight: 3.80 lbs - Dimensions: L 36.50" x W 3.30" x H 3.00"

These 12' locking multi-purpose cargo straps are a must-have accessory for anyone with a rack. Lock anything from surfboards and boats to bikes and motorcycles. Even strap and lockdown ladders and other gear. You'll wonder how you ever lived without them.

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

Tent Cover

Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear–from skis and snowboards to boats and surfboards. It installs in minutes–just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope